| Home | Media | Publications & Software | Conferences | Clients | Public Workshops | History | Contact Us |
YOU ARE HERE: Geometric Dimensioning & Tolerancing > 1-Day GDT Workshop
  ASI OFFERINGS
SIX SIGMA
Design for Six Sigma
Robust Engineering
Robust Design
Taguchi Methods
SPC
QFD
FMEA
Project Management
Lean Manufacturing
QS-9000
ISO 9000
PPAP
APQP
8D Problem Solving
DFM/DFA
VA/VE
TRIZ
GDT
 

 

 

  1. Geometric Dimensioning & Tolerancing
(1-day Workshop)

A one-day workshop is also being offered for those who have GDT experience based on the 1982 standard and would like to upgrade their knowledge and understanding to the 1994 standard.

Learning Objectives

    Introduction

    • Standardization
    • History-Company, National, ISO
    • ANSI & ASME
    • Revisions, additions, clarifications


    General Tolerancing

    • Definitions
    • Rule changes
    • Size
    • RFS & modifiers
    • Virtual & Resultant conditions

    Symbology-new

    • Controlled radius
    • Statistical Tolerancing
    • Between
    • Free State
    • Tangent Plane
    • Symmetry

    Datum System

    • Review
    • New vs. old symbol-placement
    • True Geometric Counterpart
    • Datum features, simulators, & simulated
    • Irregular shapes & compound curves
    • Inclined features

    Location

    • Tolerance study
    • Coaxial & Coplanar
    • Concentricity & Symmetry
    • Boundary concept-slots & irregular shapes
    • Composite Tolerancing-FRTZF & PLTZF
    • Orientation only & two single segments FCF

    Profile

    • Boundary concept
    • Composite Tolerancing
    • Between symbol

    Form, Orientation

    • Straightness & Circularity-changes
    • Orientation-revised zones
    • Tangent Plane
    • Non rigid parts-Free State symbol

    Additional Material

    • Appendices changes & additions
    • ASME Y 14.5.1M-1994 Mathematization

Who Should Attend?

This three-day workshop is valuable to anyone involved in the design-through-production process and users of product drawings. Anyone involved in the design-through-production process and users of product drawings should attend this workshop. It is desirable for all participants to have background knowledge or experience in the preparation and/or responsibility of definition on product drawings.

Features & Benefits:

  • The interpreter of the drawings has the responsibility to obtain and understand the National Standard
  • Drawings utilizing the National Standard should be more consistent and reduce the chances of misinterpretation
  • If disputes should arise between the company and outside activities concerning the drawing definition, the National Standard becomes the legally accepted interpretation
  • Company standards are often taken only as guidelines and, therefore, individual areas develop their own systems according to their own viewpoint.
  • GDT Fulfills a QS-9000 Requirement
 
Geometric Dimensioning & Tolerancing
What is Geometric Dimensioning and Tolerancing?
Advantages of using GDT
Advantages of the GDT Symbology
GDT Workshops (Days)
1. GDT (1)
2. Advanced GDT (3)
Register Now!
PRODUCTS & SERVICES
Upcoming Conferences
Public Workshops
Publications & Software
ASI Resource People
ABOUT ASI
Press Releases
Client List
History of ASI

         
| Home | Media | Publications & Software | Conferences | Clients | Public Workshops | History | Contact Us |
Copyright © 2000 The American Supplier Institute. All rights reserved.
Phone: 1-800-462-4500 | (734) 464-1395 | Fax: (734) 464-1399